Vertical Xcelerator IP Bedienungshandbuch PDF herunterladen (Seite 22)

Vertical Xcelerator IP

Xcelerator Owners Manual AccessLine 05-01-09

Wall-mounting a Desk Phone

The IP phone can be used on the desktop or mounted on a wall.

Print the screw alignment template (on the next page) and tape it on

the wall to position the 3 screws provided at the right place for the

mount-holes on the phone.

Before mounting the IP phone to the wall, detach the handset and

curled cord from the IP phone, then perform the following steps:

Step A On the back of the phone, find the latch (3) on the U-type leg

and remove it.

Step B Remove the other latch (4).

Step C Remove the U-type leg (1). Retain the leg (1) and latches

(2) for possible reuse in a desktop mode.

Step D Seat the big U-type frame onto the back of IP phone.

Step E Re-check that the power source switch is in the correct

position.

Connect all cables to the jacks on the phone, and then mount the

phone's holes (5 top, 6 left and 7 right) to the screws on the wall.

Step F Under the hook switch, find and press the cradle latch (8) to

let it down. Then hang up the handset and re-attach the curled cord.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 46 47

Keine Kommentare

Vertical Xcelerator IP Bedienungshandbuch Seite 22